返回首页

唐县铜雕定制厂

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
挪动转移铜雕一定要戴上棉丝手套
添加时间:2019/12/30 13:37:51     浏览次数:
1,放置铸铜雕塑的房屋必须连结干燥,没有尘埃和空气污染物,温度在18℃-24℃,相对湿度在40%-50%。
1. The house where the cast copper sculpture is placed must be dry and free of dust and air pollutants. The temperature is 18 ℃ - 24 ℃ and the relative humidity is 40% - 50%.
2,必需预防接触铸铜雕塑产生的有害化学作用物质,如酸类,油脂,氯化物等,挪动转移铜雕一定要戴上棉丝手套,不成用手直接接触,雕塑制作以避免被手上的汗侵蚀,也不成用油污的纸或盒子来包装。
2. It is necessary to prevent contact with harmful chemicals produced by cast copper sculptures, such as acids, grease, chlorides, etc. when moving and transferring copper sculptures, it is necessary to wear cotton gloves instead of direct contact with hands. Sculptures are made to avoid being eroded by sweat on hands, and they are not packaged with greasy paper or boxes.
3,铸铜雕塑上的尘埃,要用清洁而柔软的布片揩去,而那些需要出格小心的细节(易断,易损),要用柔嫩的毛刷刷去或用吸尘器吸走或是吹去尘埃。
3. The dust on the cast copper sculpture should be wiped off with a clean and soft cloth, and those details that need special care (easy to break and wear) should be brushed off with a soft brush or sucked off or blown off with a vacuum cleaner.
4,必需预防铸铜雕塑受到机械性损坏,相互间不该该彼此碰撞,不要叠压码放,对细工精制和容易损坏的铸铜雕塑,加倍要小心维护。
4. It is necessary to prevent the cast copper sculptures from being damaged mechanically. They should not collide with each other, and should not be stacked. For the fine and easily damaged cast copper sculptures, double care should be taken for maintenance.
5,铸铜雕塑摆放时间太长之后,依据摆放的环境或多或少会呈现一些暗哑的现象,这个时候可以用棉丝质的细布轻轻往返擦拭,可到达抛光的效果,从而让表面的庇护蜡层重新焕发光彩。
5. After the cast copper sculpture has been placed for a long time, it will appear some dull phenomenon more or less according to the placed environment. At this time, it can be gently wiped back and forth with a cotton silk fine cloth to achieve the polishing effect, so as to make the protective wax layer on the surface glow again.
上一页  石象生又称石翁仲  
下一页  铜雕商品是首要思索的装饰性雕塑
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3

Copyright © 技术支持:遨游网络

  • 联系我们
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3